From the genesis of this project, we have insisted on one thing:  “Unless we can faithfully reproduce the original design, we will not proceed with a product.”  Years later, we have achieved our goal and the Pulse Techniques EQP-1A3 is produced to the same specifications as the original EQP-1A3, with the minor exceptions of XLR input and output connectors and an IEC modular power connector.

Specifications

							--- 20, 30, 60, 100 cps shelf boost, 0 to 13.5 dB.
							--- 20, 30, 60, 100 cps shelf attenuate, 0 to 17.5 dB.
							--- 3, 4, 5, 8, 10, 12, 16 kcs peak boost, 0 to 18 dB.
							--- 5, 10, 20 kcs shelf attenuate, 0 to 16 dB.
							--- INPUT TRANSFORMER: 600 Ohms.
							--- OUTPUT TRANSFORMER: 600 Ohms.
							--- NOISE: 92 dB below + 10 dBm.
							--- DISTORTION: 0.15% at +10 dBm into 600 Ohms.
							--- LOSS: None. Insertion loss restored by amplifier.
							--- AMPLIFIER: Flat, 20 cps to 20 kcs; +0, -1 dB.
							--- TUBES: 1 each ECC-82/12AU7, ECC-83/12AX7, 6X4                 (included)
							--- POWER REQUIRED: 117 volts, 50/60 cps, 25 watts.
							--- PANEL SIZE: 3.5" x 19". Depth behind panel 7.75".
							--- PANEL FINISH: Brushed Aluminum
							--- MOUNTING: Standard EIA rack mount.
							--- NET WEIGHT: 15 pounds.

Made in the U.S.A.

Copyright © 2008 by PULSE TECHNIQUES, LLC. Fort Collins, Colorado